sintered dental zirconia has whiteness and translucency that very much resembles a natural tooth. therefore, it is easy to achieve very aesthetic result in full contour zirconia
Monolithic zirconia restorations are the most solid restorations possible. As there is no chemical bond between zirconia and ceramic, any porcelain on functional surface might delaminate in the course of time. This is especially true for posterior crowns and implant based restorations. Sintered zirconia is a very dense and highly acid proof material which prevents the absorption and surface accumulation of pollutants (like plaque). Monolithic zirconia restorations give a patient that amazing “clean” sensation and greatly contribute to healthy tissues.
the main objection to monolithic restorations comes from the perception that they are too abrasive for the opposing natural teeth. We should not confuse the strength of zirconia with abrasiveness. The surface of zirconia is very dense, smooth, stable and non-aggressive. In studies done in recent years it was proven that monolithic zirconia is the least abrasive of all restorative materials and even less abrasive then natural teeth.
Since 2007, our dental laboratory in Montreal, QC has been a pioneer in zirconia implants, constantly striving for perfection and investing in the latest technologies to deliver excellence.
NO. Today’s process of creation of zirconia crowns allows accepting all preparation styles and guarantee exceptional fit (marginal and otherwise). With monolithic zirconia, prep can be very conservative. With as little as 1 mm clearance, a beautiful and very solid monolithic crown can be created.
YES. Zirconia is a very bad heat conductor. Grinding without water-spray can create an extremely hot spot on the surface of the crown (over a 1,000º c). At those temperatures the structure of zirconia in this spot can change, which will lead to creation of micro cracks and weakening of the restoration.
We recommend using fine diamonds for dental zirconia crowns. Fine bur will remove/cut zirconia very well and will last longer. Medium or rough burs get clogged fast with fine zirconia dust and will not remove material, but unnecessary overheat the surface.
Yes. At our dental zirconia laboratory in Montreal, we have no limitation in implant type or brand. Depending on the case at hand, direct screw retained or cemented crown on custom or prefabricated abutment can be realized on any implant system.
There’s no limit to the span of a zirconia bridge or to the amount of pontics. The only condition is the right design. The larger the distance between the abutments the taller and wider the connectors should be. However, in light of the stability of this material, sound dental principles should be adhered to. At our dental studio in Montreal, we are routinely creating one piece full arch restorations and can report success since 2007. We’ve created very clear protocols for successful long span restorations and can guarantee any case that in made in our studio.
In principle, zirconia restorations can be conventionally fixed in place using any dental cement. However, it needs to be noted that zirconia does not etch, therefore for inlays and onlays, as well as for maryland bridges, additional mechanical retention should be created in preps and in the restoration.